Synthesis and characterization of water-soluble C₆₀–peptide conjugates

• Yue Ma,
• Lorenzo Persi and
• Yoko Yamakoshi

Beilstein J. Org. Chem. 2024, 20, 777–786, doi:10.3762/bjoc.20.71

• of hydrophilic oligopeptide anchors (oligo-Lys, oligo-Glu, and oligo-Arg) were synthesized. A previously reported Prato reaction adduct of a biscarboxylic acid-substituted C60 derivative was subjected to a solid phase synthesis for amide formation with N-terminal amines of peptides on resin to

• suitable for the coupling to peptides on resin, prepared by solid-phase peptide synthesis (SPPS) [35]. The detailed conditions for the amide-forming reaction were optimized using biscarboxylic acid-substituted C60 derivative 3 and a similar peptide with a primary amine derived from γ-aminobutyric acid

• resin (rink amide MBHA) relative to 3, provided a rather low yield (13%, isolated by HPLC), which was increased to 24% by changing the solid phase to 2-chlorotrityl chloride resin. By replacing the base with N,N-diisopropylethylamine (DIPEA), the yield was slightly increased to 28%, which became higher

Chemoenzymatic synthesis of macrocyclic peptides and polyketides via thioesterase-catalyzed macrocyclization

• Senze Qiao,
• Zhongyu Cheng and
• Fuzhuo Li

Beilstein J. Org. Chem. 2024, 20, 721–733, doi:10.3762/bjoc.20.66

• attention is given to the strategies of mimics formation to demonstrate how biocatalysis provides an elegant link between chemistry and biology. Review Macrocyclic peptides Since first being reported in the 1960s [26], solid-phase peptide synthesis (SPPS) has been an invaluable tool for preparing numerous

• and promote the utilization of TE domains as biocatalysts with tremendous potential. To this purpose, Walsh and co-workers developed the 2nd generation of tyrocidine chemoenzymatic approach utilizing a linear peptide immobilized on the solid-phase support poly(ethylene glycol) acrylate (PEGA) with a

• -product biosynthesis and combinatorial solid-phase chemistry, this strategy has expanded the sequence space of macrocyclic peptides significantly (Scheme 2c). The daptomycins The calcium-dependent antibiotic (CDA, 11), daptomycin (12), and A54145 are acidic lipopeptides isolated from Streptomycetes, which

Synthesis of 2,2-difluoro-1,3-diketone and 2,2-difluoro-1,3-ketoester derivatives using fluorine gas

• Alexander S. Hampton,
• David R. W. Hodgson,
• Graham McDougald,
• Linhua Wang and
• Graham Sandford

Beilstein J. Org. Chem. 2024, 20, 460–469, doi:10.3762/bjoc.20.41

• , but the second fluorination step occurs only after reaction for several days. In the solid phase, mechanical milling of the diketone substrate with solid Selectfluor in the presence of sodium carbonate [13][14], and reaction of ketones with a strong base and an N–F reagent give rise to the

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

A novel recyclable organocatalyst for the gram-scale enantioselective synthesis of (S)-baclofen

• Gyula Dargó,
• Dóra Erdélyi,
• Balázs Molnár,
• Péter Kisszékelyi,
• Zsófia Garádi and
• József Kupai

Beilstein J. Org. Chem. 2023, 19, 1811–1824, doi:10.3762/bjoc.19.133

• long and expensive process. Therefore, for sustainable application, the cost-efficient recovery and reuse of organocatalysts are critical issues. Fortunately, a wide range of recycling options are known in the literature, often based on liquid–solid phase separation [14]. Catalyst recycling can be

Linker, loading, and reaction scale influence automated glycan assembly

• Marlene C. S. Dal Colle,
• Manuel G. Ricardo,
• Nives Hribernik,
• José Danglad-Flores,
• Peter H. Seeberger and
• Martina Delbianco

Beilstein J. Org. Chem. 2023, 19, 1015–1020, doi:10.3762/bjoc.19.77

• purification steps. Keywords: automated glycan assembly; photocleavable linker; polysaccharides; solid-phase synthesis; Introduction Automated glycan assembly (AGA) is a solid-phase method that enables the rapid synthesis of complex oligo- and polysaccharides from protected monosaccharide building blocks

• scale [19], and linkers [20][21] affect the overall yield of solid phase peptide synthesis (SPPS). In the past decades, several supports and linkers have been developed and commercialized for SPPS, enabling a wide range of applications. Solid supports are available with different linker loadings, with

Synthesis of tetrahydrofuro[3,2-c]pyridines via Pictet–Spengler reaction

• Elena Y. Mendogralo and
• Maxim G. Uchuskin

Beilstein J. Org. Chem. 2023, 19, 991–997, doi:10.3762/bjoc.19.74

• -c]pyridines. Moreover, multistep cascade processes with the simultaneous construction of several cores were described, where the key step is the generation of an acyliminium cation and the Pictet–Spengler cyclization [30][31][32], including solid-phase synthesis [33][34][35]. Another route for the

C3-Alkylation of furfural derivatives by continuous flow homogeneous catalysis

• Grédy Kiala Kinkutu,
• Catherine Louis,
• Myriam Roy,
• Juliette Blanchard and
• Julie Oble

Beilstein J. Org. Chem. 2023, 19, 582–592, doi:10.3762/bjoc.19.43

• Supporting Information File 1, p. S20), meaning that the ruthenium trimer was no longer present. The TEM analysis of the recovered solid phase (Scheme 5B) showed the formation of large aggregates with high electron density. Moreover, ruthenium was detected by XPS analysis (Scheme 5B); the binding energy of

• reaction with formation of ruthenium aggregates and mononuclear Ru(0) catalyst. A) Isolation test of a reaction intermediate; B) XPS and TEM (in ethanol) of the recovered solid phase: showing the presence of Ru aggregates. Ruthenium aggregate-catalyzed alkylation reaction. Scope of continuous flow furfural

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• the coumarin moiety in the case of zinc porphyrin analogues. In 2017, Yamana et at. [35] reported the synthesis of porphyrin-DNA conjugate 50 by a solid-phase “click reaction” between azidoporphyrin 39a and oligodeoxynucleotides 49 bearing an ethynyl group in the presence of CuSO4·5H2O and sodium

Solid-phase total synthesis and structural confirmation of antimicrobial longicatenamide A

• Takumi Matsumoto,
• Takefumi Kuranaga,
• Yuto Taniguchi,
• Weicheng Wang and
• Hideaki Kakeya

Beilstein J. Org. Chem. 2022, 18, 1560–1566, doi:10.3762/bjoc.18.166

• communication in the microbial world. Herein, we report the solid-phase total synthesis and structural confirmation of longicatenamide A. First, commercially unavailable building blocks were chemically synthesized with stereocontrol. Second, the peptide chain was elongated via Fmoc-based solid-phase peptide

• longicatenamide A was confirmed. The developed solid-phase synthesis is expected to facilitate the rapid synthesis of diverse synthetic analogues. Keywords: antimicrobial; longicatenamides; peptidic natural product; solid-phase synthesis; total synthesis; Introduction Naturally occurring bioactive compounds can

• microbial world. To elucidate the role of compounds 1–4 in the microbial world, developing a strategy to synthesize compounds 1–4, including future derivatization to produce probe molecules, is required. Herein, we report the total synthesis of peptide 1 by Fmoc-based solid-phase peptide synthesis [9] and

Using UHPLC–MS profiling for the discovery of new sponge-derived metabolites and anthelmintic screening of the NatureBank bromotyrosine library

• Sasha Hayes,
• Aya C. Taki,
• Kah Yean Lum,
• Joseph J. Byrne,
• Merrick G. Ekins,
• Robin B. Gasser and
• Rohan A. Davis

Beilstein J. Org. Chem. 2022, 18, 1544–1552, doi:10.3762/bjoc.18.164

• II ETD ESI-qTOF. Phenomenex Strata solid phase extraction (SPE) cartridges (3 cc, polypropylene, single fritted) were used for the small-scale marine sponge extractions. GRACE Davisil (35–70 µm, 60 Å) C18-bonded silica was used for pre-absorption work before reversed-phase (RP) HPLC. The preabsorbed

Thermally activated delayed fluorescence (TADF) emitters: sensing and boosting spin-flipping by aggregation

• Ashish Kumar Mazumdar,
• Gyana Prakash Nanda,
• Nisha Yadav,
• Upasana Deori,
• Upasha Acharyya,
• Bahadur Sk and
• Pachaiyappan Rajamalli

Beilstein J. Org. Chem. 2022, 18, 1177–1187, doi:10.3762/bjoc.18.122

• thermally activated delayed fluorescence (TADF) characteristics are emerging due to the potential applications in optoelectronic devices, time-resolved luminescence imaging, and solid-phase sensing. Herein, we synthesized two (4-bromobenzoyl)pyridine (BPy)-based donor–acceptor (D–A) compounds with varying

• donor size and strength: the emitter BPy-pTC with tert-butylcarbazole (TC) as the donor and BPy-p3C with bulky tricarbazole (3C) as the donor unit. Both BPy-pTC and BPy-p3C exhibited prominent emission with TADF properties in solution and in the solid phase. The stronger excited-state charge transfer

• sensitive to acidic protons. Hence, the exposure to acid and base vapors using trifluoroacetic acid (TFA) and triethylamine (TEA) led to solid-phase fluorescence switching with fatigue resistance. The current study demonstrates the role of the donor strength and size in tuning ΔEST in the aggregated state

On Reuben G. Jones synthesis of 2-hydroxypyrazines

• Pierre Legrand and
• Yves L. Janin

Beilstein J. Org. Chem. 2022, 18, 935–943, doi:10.3762/bjoc.18.93

• system driven by a UV detector set to 254 nm unless required otherwise. Sample deposition was carried out by absorption of the mixture to be purified on a small amount of the solid phase followed by its deposition on the top of the column. For chromatography run at 60 °C a complete and illustrated

First series of N-alkylamino peptoid homooligomers: solution phase synthesis and conformational investigation

• Maxime Pypec,
• Laurent Jouffret,
• Claude Taillefumier and
• Olivier Roy

Beilstein J. Org. Chem. 2022, 18, 845–854, doi:10.3762/bjoc.18.85

• evaluated few segment-based coupling methods. The optimizations made with respect to the standard submonomer synthetic conditions will be useful for developing solid-phase synthesis and access longer and more diverse N-(alkylamino)peptoid oligomers in the future. NMR analysis of the synthesized oligomers 1

A trustworthy mechanochemical route to isocyanides

• Francesco Basoccu,
• Federico Cuccu,
• Federico Casti,
• Rita Mocci,
• Claudia Fattuoni and
• Andrea Porcheddu

Beilstein J. Org. Chem. 2022, 18, 732–737, doi:10.3762/bjoc.18.73

• entirely exerted in the solid phase through mechanochemical activation. In conclusion, we hope that our synthetic strategy could be considered a significant step toward a less impacting and more extensive research on isocyanide chemistry. Resonance forms of isocyanides. The purification process of a

Synthesis and bioactivity of pyrrole-conjugated phosphopeptides

• Qiuxin Zhang,
• Weiyi Tan and
• Bing Xu

Beilstein J. Org. Chem. 2022, 18, 159–166, doi:10.3762/bjoc.18.17

• shown nucleobases, as the heteroaromatic groups, are able to act as the N-capping group for EISA of phosphopeptides [67]. In this study, we chose to examine a different type of heteroaromatic group, pyrroles, because pyrrole is adaptable for solid-phase synthesis [68] so that it is feasible to conjugate

• the designed peptides combines solution synthesis of the enzyme trigger or the fluorophore with the solid-phase synthesis of the pyrrole-peptide conjugates. We used phosphorus pentoxide and phosphoric acid to react with ᴅ-tyrosine, ʟ-tyrosine, ʟ-serine, or ᴅ-serine to produce ᴅ-phosphotyrosine, ʟ

• -phosphotyrosine, ʟ-phosphoserine, or ᴅ-phosphoserine, respectively. After being protected by an Fmoc group, these phosphorylated amino acids are suitable for solid-phase synthesis. We also used solution-phase synthesis to synthesize NBD-β-alanine according to the reported procedures [66]. We used standard Fmoc

Peptide stapling by late-stage Suzuki–Miyaura cross-coupling

• Hendrik Gruß,
• Rebecca C. Feiner,
• Ridhiwan Mseya,
• David C. Schröder,
• Michał Jewgiński,
• Kristian M. Müller,
• Rafał Latajka,
• Antoine Marion and
• Norbert Sewald

Beilstein J. Org. Chem. 2022, 18, 1–12, doi:10.3762/bjoc.18.1

• organoboron containing side chain in the i + 4-position. The peptides were synthesised on Rink amide resin by solid-phase peptide synthesis (SPPS) with Fmoc/t-Bu strategy followed by on-resin SMC. For the cross-coupling, a modified protocol by Planas and co-workers was used [78]. Pd2(dba)3 was employed as the

First total synthesis of hoshinoamide A

• Haipin Zhou,
• Zihan Rui,
• Yiming Yang,
• Shengtao Xu,
• Yutian Shao and
• Long Liu

Beilstein J. Org. Chem. 2021, 17, 2924–2931, doi:10.3762/bjoc.17.201

• -sensitive Plasmodium falciparum. Herein, we describe the first total synthesis of hoshinoamide A by the combination of liquid-phase and solid-phase peptide synthesis. Liquid-phase synthesis is to improve the coupling yield of ʟ-Val3 and N-Me-ᴅ-Phe2. Connecting other amino acids efficiency and convergence is

• in Scheme 1, we initially tested Fmoc solid-phase peptide synthesis (SPPS) [13] to get 2-chlorotrityl resin-bound Pro1-(N-Me)-Phe2 dipeptide 2 under the conditions of HCTU and DIPEA. Unfortunately, the N-Me coupling proceeded in low yield (<10%). In order to improve the coupling yield of the hindered

• spectroscopic data of synthetic hoshinoamide A were in excellent agreement with the data previously reported for the natural product. Conclusion In summary, we have completed the first total synthesis of hoshinoamide A. By combining the liquid and solid-phase peptide synthetic strategy, hoshinoamide A was

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

• approach was efficient in solid phase as well as in solution phase synthesis. The participating (S)-(phenylthiomethyl) benzyl chiral auxiliary at the C-2 position of the glucosyl donor permitted the solid phase synthesis of a branched pentaglucan having a α(1–3) branch on an α(1–6) backbone [174]. Boron

• ][260]. The automated solid-phase approach required only two BBs with the amino group protected either with the N-TCA 79 or with the N-Cbz group 80 (Scheme 12). Compounds 81–85 served as standards to explore the conformational space of COS with different PA. NMR analysis and MD simulations revealed the

• , ranging from tri- to hexasaccharide, was obtained via iterative electrochemical assembly [266]. A solid-phase automated approach delivered β(1–6)-glucosamine hexasaccharide 87a and dodecasaccharide 87b (Scheme 13A) [267]. β(1–3)-Oligomer 90 was prepared as chitin mimetics (Scheme 13B). Despite the subtle

Cationic oligonucleotide derivatives and conjugates: A favorable approach for enhanced DNA and RNA targeting oligonucleotides

• Mathias B. Danielsen and
• Jesper Wengel

Beilstein J. Org. Chem. 2021, 17, 1828–1848, doi:10.3762/bjoc.17.125

• solid-phase DNA synthesis, circumventing some of the laborious work involved in the synthesis of some internucleotide linkages. The authors demonstrated that this new modification could enhance the stability of the ON/RNA duplex, although no significant change was observed for the ON /DNA duplex (100 mM

Chemical synthesis of C6-tetrazole ᴅ-mannose building blocks and access to a bioisostere of mannuronic acid 1-phosphate

• Eleni Dimitriou and
• Gavin J. Miller

Beilstein J. Org. Chem. 2021, 17, 1527–1532, doi:10.3762/bjoc.17.110

• this end, synthetic chemistry strategies (both solution and solid phase) have demonstrated exciting capabilities for access to native alginate oligosaccharides in recent years [6][7][8][9][10]. As part of a program to access non-native alginate oligosaccharide sequences, we targeted a synthetic

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• phosphoramidites 160 and 164 which were then incorporated into oligodeoxynucleotides using automated solid phase synthesis. The synthesized oligonucleotides were removed from the solid support by treatment with concentrated aqueous ammonia which resulted in the formation of incorporated monomers 161 and 165 by

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Beyond ribose and phosphate: Selected nucleic acid modifications for structure–function investigations and therapeutic applications

• Christopher Liczner,
• Kieran Duke,
• Gabrielle Juneau,
• Martin Egli and
• Christopher J. Wilds

Beilstein J. Org. Chem. 2021, 17, 908–931, doi:10.3762/bjoc.17.76

• diseases. Oligonucleotides with alterations to their scaffold, prepared with modified nucleosides and solid-phase synthesis, have yielded molecules with interesting biophysical properties that bind to their targets and are tolerated by the cellular machinery to elicit a therapeutic outcome. Structural

• modifications N3' → P5' phosphoramidate The N3' → P5' phosphoramidate DNA (3'-NP DNA) contains a negatively charged internucleotide linkage, but one of the bridging oxygens is replaced by a nitrogen (Figure 1A). The 3'-NP linkage is generated during solid-phase synthesis where the incoming protected 5'-DMT-3

• synthesize the nucleoside dimer phosphoramidite with the appropriate amide linkage, which can then be introduced into the strand by solid-phase synthesis. These dimers are synthesized by using an amide coupling reagent to condense a 3'-carboxylic acid nucleoside with a 5'-amine nucleoside, where the

Enhanced target cell specificity and uptake of lipid nanoparticles using RNA aptamers and peptides

• Roslyn M. Ray,
• Anders Højgaard Hansen,
• Maria Taskova,
• Bernhard Jandl,
• Jonas Hansen,
• Citra Soemardy,
• Kevin V. Morris and
• Kira Astakhova

Beilstein J. Org. Chem. 2021, 17, 891–907, doi:10.3762/bjoc.17.75

• ’-flouronated base; italics and underlined = 2’-O-methyl base Complementary DNA A-1: (Cy5/AGG CTA TCT AGA ATG TAC) G-3: (Cy5/TCT ATC AAT CTA TCA) Peptide synthesis, purification, and characterization Peptide assembly was carried out by solid-phase peptide synthesis in standard solid-phase extraction filtration